News
Home / News /

New filter press consumes less power and can be operated continuously

  • Release Date:15-06-2018
  • Abst:

    No matter what the equipment is today, it can exert excellent work efficiency under good operating conditions. How to buy a belt sludge filter to adjust and exert the best results. What are the details to pay attention to when adjusting to the best sludge treatment? What are the starting points?

    The main feature of the belt filter press is the use of the tension and pressure of the filter cloth to pressurize the sludge on the filter cloth to dehydrate it. It does not require vacuum or pressurization equipment. It consumes less power and can be operated continuously. Its operation is only determined In the speed and ability of the filter cloth, even if the load changes during operation, it can be dehydrated stably, and the structure is simple; without noise and vibration, it is easy to realize the closed operation. The belt filter press is suitable for the dewatering of activated sludge and organic hydrophilic sludge, and is currently widely used by manufacturers in sludge dewatering.

    Using the tension and pressure of the filter cloth to pressurize the sludge on the filter cloth to dehydrate it does not require vacuum or pressurization equipment. It has less power consumption, convenient operation and management, and can be continuously operated, so it is most widely used. At the same time, the belt-type sludge dewatering machine is less affected by the fluctuation of the sludge load. It also has a low water content in the sludge, a stable work and low consumption, relatively simple management and control, and low requirements on the quality of the operating personnel. Can also play the best sludge treatment effect.

    It will concentrate or digest the sludge in the fluid state and reduce or remove the water. The process of converting it into a semi-solid or solid mud cake is called sludge dewatering. After dehydration, the sludge moisture content can generally be reduced to 70% to 85%, depending on the nature of sludge and sediment and the effectiveness of dewatering equipment. Further dewatering of the sludge means that the sludge is dried, and the moisture content of the dried sludge is generally lower than 20%.

    Therefore, if the product can exert the best sludge treatment effect, it will enhance the dehydration and increase the efficiency of the enterprise.

    http://www.jlfilterpress.com/