News
Home / News /

The operation and maintenance of the sludge filter press

  • Release Date:11-05-2018
  • Abst:

    The service life of the sludge filter press is the boss's most concerned concern. In fact, this is understandable. After all, the cost of the equipment is not small. The bosses all want its service life to be longer or even permanent. However, it is not only the filter press itself that affects the service life of the sludge filter press. The most important is the operation and maintenance of the sludge filter press. Moreover, sludge filter press wear can be unavoidable during operation, but as long as the maintenance of the two major components is done, the service life of the filter press can be greatly improved.

    1.filter plate

    The main cause of aging in the filter press working process is the filter plate. The main reason is that the filter plate is in direct contact with the filtrate. If the user is not aware of it, it is likely to cause the filter plate to crack and directly affect the use of the filter press. Therefore, the filter plate should be replaced in time during the use of the filter press.

    2. Hydraulic system

    The entire system, the hydraulic system is the highest demand and the highest precision. Even if the re-precision is manufactured at the time of shipment from the factory, if the main components are worn out after a period of use, the high-precision failure of the system is apt to occur. To a certain extent, professional maintenance personnel are required to repair it.

    http://www.jlfilterpress.com/